Stainless Steel Frames

NCHM’s DEFENDDOOR stainless steel hollow metal frames are manufactured with 16 or 14 gauge type 304 or 316 in typical No. 3, 4 (satin) or 2b mill finishes. Each frame-profile is formed on a brake press for added strength and stability. The head and jamb sections are assembled with a tab-and-slot arrangement to ensure accurate alignment of the corner miters. The face of each frame is continuously welded and hand polished to match the original exterior stainless steel surface.
Anchorage

DEFENDDOOR stainless steel frames are furnished with a minimum of six proper anchors of manufacturer’s standard design as required by wall conditions. Frames have sill anchors welded to the bottom of all jambs for attachment to the finished floor. KD Compression Anchor Frames are available upon request.

Design

If you can dream it, NCHM can craft it.

DEFENDDOOR stainless steel frames are available as
standard and custom openings, borrowed lights,
side lights and transom frames.

Stainless Steel Spats

NCHM spats provide an extra layer of protection
from corrosive chemicals and or cleaners that may
harm stainless steel frames. Our spats are fabricated
in 304 or 316 type stainless steel and are available
from 4" up to full frame height. Contractor installation
is required. Spats may be attached with screws
or adhesive, or securely snaped into place.
Why pay more and get less?

Let NCHM quote your next project
and get a better value!

Call 501.372.3441 or 1.800.334.3070,
or fax 501.375.3070.
sales@defenddoor.com
www.DefendDoor.com
Follow NCHMetal on Twitter
Home  |  About Us  |  Stainless Steel Doors  |  Stainless Steel Frames  |  Industries Served  |  Contact Us